Active Q Plus
₹10,200.00₹9,690.00inc. GST
Active Q Plus Z20 Plus 4-Lens 5MP 4G Solar…
1 offer unit availableView offer →
Zebronics ZEB-4PPM2UM Lite + ZEB-8PPM2UM Lite PoE Switch Combo | 4-Port + 8-Port | 1 Year Warranty
Roll over image to zoom in
₹2,346.00₹3,050.00 inc.GST (-23%)
Minimum cart order ₹500 — you can mix any products.
Zebronics Dual PoE Switch Combo — 4-Port + 8-Port Network Expansion
- 📦 Two-Switch Combo: One ZEB-4PPM2UM Lite and one ZEB-8PPM2UM Lite unmanaged PoE switch.
- 📹 12 PoE Camera Ports Total: Four self-adaptive PoE ports plus eight self-adaptive PoE ports across the two switches.
- 🔗 Dual Uplinks on Each Switch: Two 100Mbps Ethernet uplink ports per unit for recorder or network connection.
- ⚡ 195W Combined PoE Budget: 75W maximum on the 4-port switch and 120W maximum on the 8-port switch.
- 📏 Extended Mode: Up to 250m advertised transmission under the manufacturer’s stated cable and speed conditions.
- 🛡️ Protection Features: Dynamic power control, short-circuit, voltage, interference, lightning and 6kV surge protection.
- ✅ 1-Year Warranty: Dealer-supplied warranty, subject to Zebronics terms and a valid BuyCCTVs invoice.
Please confirm the current price and stock on WhatsApp before completing your purchase.
Confirm Price / Stock on WhatsApp
Who is BuyCCTVs.com?
We connect your order with the seller or fulfilment partner, coordinate delivery and help arrange installation, service and warranty support.
See how your order works →
Compare with similar PoE / Network Switch products
MORE WAYS TO SAVE
More live CCTV offers
Compare these limited-price cameras before completing your order.
Active Q Plus
₹6,000.00₹5,700.00inc. GST
Active Q Plus SW2 5MP+5MP WiFi Dual Camera Solar…
1 offer unit availableView offer →
Active Q Plus
₹12,000.00₹11,400.00inc. GST
Active Q Plus BP19 5-Lens WiFi Hybrid Solar Camera…
1 offer unit availableView offer →
Active Q Plus
₹9,600.00₹9,120.00inc. GST
Active Q Plus Z30 5-Lens Quad-View Solar PTZ Camera…
1 offer unit availableView offer →
Product details
Zebronics CCTV Networking Combo
ZEB-4PPM2UM Lite + ZEB-8PPM2UM Lite
12 PoE ports • 4 uplink ports • 195W combined PoE budget • 1-year warranty
Two correctly sized PoE switches in one value bundle
This combo includes the Zebronics ZEB-4PPM2UM Lite and ZEB-8PPM2UM Lite. Use them for separate floors, buildings or camera zones, or keep one switch for a smaller four-camera deployment and the other for an eight-camera network. Both are unmanaged, self-adaptive IEEE 802.3af/at PoE switches designed to carry camera data and power over compatible Ethernet cabling.
The offer price covers one unit of each model. Network recorders, cameras, patch cables and routers shown or discussed as applications are not included.
ZEB-4PPM2UM Lite
- 4 × 10/100M self-adaptive PoE ports
- 2 × 10/100M Ethernet uplinks
- 75W maximum power budget
- Up to 30W per port
- 1.2Gbps bandwidth
ZEB-8PPM2UM Lite
- 8 × 10/100M self-adaptive PoE ports
- 2 × 10/100M Ethernet uplinks
- 120W maximum power budget
- Up to 30W per port
- 5.6Gbps switching bandwidth
Official specification comparison
| Specification | ZEB-4PPM2UM Lite | ZEB-8PPM2UM Lite |
|---|---|---|
| PoE / uplink ports | 4 × 10/100M PoE + 2 × 10/100M uplink | 8 × 10/100M PoE + 2 × 10/100M uplink |
| PoE standard | IEEE 802.3af/at; Mode A | IEEE 802.3af/at; Mode A |
| Maximum PoE budget | 75W; up to 30W per port | 120W; up to 30W per port |
| Extended transmission | Up to 250m advertised | Up to 250m at 10M with Cat6 |
| Bandwidth / MAC / buffer | 1.2Gbps / 1K / 1Mbit | 5.6Gbps / 1K / 1Mbit |
| AC input | AC 110–240V, 50/60Hz | AC 100–240V, 50/60Hz |
| Surge protection | 6kV | 6kV |
| Forwarding mode | Cut-through switching | Store-and-forward |
| Dimensions / net weight | 20.2 × 14 × 4.5cm / 950g | 20 × 14 × 4.5cm / 700g |
| Country of origin | India | India |
PoE planning before installation
- Add each camera’s maximum PoE draw, especially IR and white-light night mode.
- Keep the total load below 75W on the 4-port unit and 120W on the 8-port unit.
- Use suitable copper Ethernet cable and correct termination for longer runs.
- Extended-distance mode may operate at a reduced link speed; verify recorder bandwidth requirements.
- Keep both switches ventilated and protect their AC supply with proper earthing.
Frequently asked questions
Is this one switch or two?
It is a two-product combo: one ZEB-4PPM2UM Lite and one ZEB-8PPM2UM Lite.
Are the uplink ports Gigabit?
No. These two exact Lite models use dual 100Mbps uplink ports. They must not be confused with similarly named Gigabit-uplink Zebronics models.
Will every PoE camera work?
The camera must support IEEE 802.3af or 802.3at and stay within the port and total power budgets. Passive-PoE devices require separate compatibility confirmation.
Official references: Zebronics ZEB-4PPM2UM and Zebronics ZEB-8PPM2UM. Combo price and 1-year warranty follow the dealer-supplied offer.
Additional information
| Brand | Zebronics |
|---|---|
| Device Type | PoE Switch |
| Warranty | 1 Year |
| Models | ZEB-4PPM2UM Lite + ZEB-8PPM2UM Lite |
| PoE Ports | 4 + 8 (12 total) |
| Uplink Ports | 2 per switch (4 total), 10/100Mbps |
| PoE Power Budget | 75W + 120W (195W combined) |
| PoE Standard | IEEE 802.3af/at, up to 30W per port |
01
ORDER & SUPPORT COORDINATION
Who is BuyCCTVs.com?
BuyCCTVs.com is your ordering, coordination and support platform. Depending on the order, the listed seller or fulfilment partner prepares and dispatches the products under BuyCCTVs seller terms. We keep the buyer, seller and service network connected and help move the order to completion.
1You orderSelect the products or CCTV combo and place the order.
2BuyCCTVs coordinatesOrder details are routed and tracked with the seller or fulfilment partner.
3Seller preparesThe seller checks stock, packs the products and follows BuyCCTVs seller terms.
4Delivery to youThe seller or courier dispatches the order to the customer address.
5Support continuesWe help coordinate installation, service and eligible warranty requests.
Please note: BuyCCTVs may be the seller for some orders and a coordination platform for others. The invoice/order details identify the applicable seller. Product warranty remains subject to the brand, manufacturer or seller policy.
02
CAMERA SYSTEM GUIDE
How to choose: HD or IP CCTV?
HD analogue + DVR/XVR
Connection: Camera → 3+1/coax cable → BNC video + DC power → DVR/XVR.
Power: A separate CCTV SMPS or adapter normally powers the cameras.
Mobile viewing: A network-ready DVR/XVR can connect to a router for live view and playback through its compatible mobile app.
Best when: Lower initial budget, familiar coax installation or an existing analogue cable can be reused.
IP camera + NVR
Connection: Camera → Cat6/RJ45 → PoE switch or PoE NVR → NVR.
Power: PoE can carry data and power on one network cable.
Mobile viewing: A network-connected NVR or compatible IP camera can provide live view and playback through its supported mobile app.
Best when: You want higher detail, easier expansion, network flexibility and richer smart features.
Mobile-view rule: Both HD DVR/XVR and IP NVR systems can support mobile viewing when the recorder is network-enabled, connected to the internet and configured with the compatible app. Mobile viewing is not exclusive to IP cameras.
Important: An NVR is not automatically a PoE NVR. When the NVR has no built-in PoE ports, a compatible external PoE switch is required. A video balun carries analogue HD video over Cat6; it does not convert an analogue camera into an IP camera.
Important: An NVR is not automatically a PoE NVR. When the NVR has no built-in PoE ports, a compatible external PoE switch is required. A video balun carries analogue HD video over Cat6; it does not convert an analogue camera into an IP camera.
04
ACCESSORY GUIDE
What each CCTV accessory does
Accessories are not random extras. Each one handles storage, power, cabling, internet access, mounting or local viewing.
Surveillance HDD
Stores recorded video. Capacity decides how many days of footage you can retain.
PoE switch
Powers and networks IP cameras. Port count and power budget must cover the selected cameras.
CCTV SMPS
Supplies 12V power to HD analogue cameras; capacity should match the camera count.
Cat6 cable + RJ45
Standard network connection for IP cameras. It can carry both data and PoE power.
3+1 cable + BNC/DC
Common HD analogue cable: coax video plus power. BNC carries video and DC carries power.
Video balun pair
Sends analogue HD video over a Cat6 pair. One transmitter/receiver pair is used per camera channel.
CCTV rack
Keeps the recorder, switches, router and power units organised, protected and serviceable.
4G/SIM router
Provides internet for remote viewing where broadband is unavailable; a separate data plan is required.
Monitor + HDMI
Shows live view and playback locally. HDMI connects the recorder output to the monitor or TV.
PVC camera box
Protects cable joints and connector termination near each camera; normally one box per camera.
UPS / surge protection
Keeps the system running briefly during power cuts and helps protect equipment from voltage changes.
Cable rule: IP cameras normally use Cat6 and RJ45. HD analogue cameras normally use 3+1/coax with BNC and DC. Video baluns are optional for analogue video over Cat6 and are compulsory only when that analogue-over-Cat6 design is used.
