Solid Copper Video Core • Shielded • One Cable Per Camera
The Cable Your Camera Deserves
Camera quality means nothing if the cable between camera and DVR is junk — grainy video, rolling lines and night noise are usually cable problems. The CP Plus CP-ECC-70R gets the fundamentals right at an economy price: a solid annealed bare copper video core (not the copper-clad steel cheap rolls hide inside) wrapped in a 36-strand AL alloy braid that shields the picture from interference.
The 3+1 construction bundles video, 12V power and audio into one 5.5mm run — one neat cable per camera instead of three. At 70 metres it’s sized for typical 4-camera home and shop installs, with stranded 14-strand copper power cores that carry supply voltage with minimal drop.
🥇 Copper Where It Counts
The video core is the signal path — solid bare copper keeps HD analog video sharp across the full run, day and night.
🔌 One Run, Three Jobs
Video + power + audio in a single jacket — faster installs, cleaner walls, fewer failure points than separate wiring.
📊 Full Technical Specifications — CP-ECC-70R
Model
CP-ECC-70R (Eco Series)
Construction
3+1 — video, power & audio communication
Length
70 metres
Video Core
Solid annealed bare copper, 0.50±0.02mm, 1.5mm insulation
Braiding
AL alloy, 36 strands
Power Cores
Stranded copper, 14 strands, PVC insulated
Overall Diameter / Sheath
~5.5mm; 1.3±0.05mm sheath
Application
HD analog CCTV — video, power & audio
❓ Frequently Asked Questions
Will 70m cover a 4-camera install? Usually yes — typical home/shop runs are 10–20m per camera. Measure your longest run and add 10% slack.
R or RS version? This Eco R is great value for indoor and short runs; the RS steps up to a 48-strand braid, thicker conductor and tougher LLDPE jacket for longer or exposed runs.
Does it work with 5MP HD cameras? Yes — solid copper core carries HD analog signals (up to 5MP class) cleanly over typical distances.
Is it for IP cameras? No — IP/PoE cameras use Cat6. This 3+1 coaxial cable is for HD analog (DVR-based) systems.
