90 Metres • Solid Copper Core • One Cable Per Camera
Twenty Extra Metres, Zero Joints
Every cable joint is a future fault — corrosion, signal loss, water ingress. The CP Plus CP-ECC-90R exists so you don’t need joints: 90 continuous metres of 3+1 cable that reaches the corner camera of a larger home, a full shop floor, or a small warehouse in one unbroken run.
Inside is the same honest construction as the 70m Eco: a solid annealed bare copper video core under an AL alloy braid shield, plus stranded copper power cores and an audio line — all in one ~5.5mm jacket. For longer runs like these, pair it with a cable-compensation power supply (like the CP Plus V2/V3 series) so the far camera gets full voltage.
📏 One Unbroken Run
90m without a joint means no corrosion points, no taped junctions in false ceilings, no mystery faults two monsoons later.
⚡ Long-Run Power Tip
On 60m+ runs, 12V sags by the time it reaches the camera — flip your CP Plus supply to Long/Ex-Long compensation mode and the night picture stays strong.
📊 Full Technical Specifications — CP-ECC-90R
Model
CP-ECC-90R (Eco Series)
Construction
3+1 — video, power & audio communication
Length
90 metres
Video Core
Solid annealed bare copper
Braiding
AL alloy shield
Power Cores
Stranded copper, PVC insulated
Application
HD analog CCTV — video, power & audio
❓ Frequently Asked Questions
70m or 90m roll? Measure your longest camera run and add 10% slack — if any single run passes ~60m, or total wiring needs it, the 90m roll avoids joints.
Will video stay sharp at 90m? Yes with the solid copper core — and set your power supply’s cable compensation for the power side.
R or RS at this length? At 90m the RS’s denser braid and thicker core give extra margin — worth it for outdoor or interference-prone routes.
Is it for IP cameras? No — this is for HD analog (DVR) systems; IP/PoE cameras use Cat6.
